Strainer Manufacturer in India

Name: Industrial Strainer
Brand: AXEGIC

Cheap insurance for expensive equipment

A strainer is a perforated or mesh screen in a pressure-retaining body. It traps particles carried by the fluid and holds them until the screen is cleaned. Fitting a strainer upstream of pumps, control valves, meters, steam traps and heat exchangers prevents seat damage and blockages that would otherwise cause unplanned shutdowns.

Axegic strainers are made from quality raw materials sourced from trusted vendors, comply with international standards and pass rigid testing before dispatch.

Strainer types

Y type

Y type strainer

Compact, in-line; horizontal or vertical-down installation; flanged, welded or threaded ends.

Basket

Basket type strainer

Large dirt-holding capacity and low pressure drop for bigger flows.

T type

T type strainer

Fabricated tee body for large bore lines; screen removed through the branch.

Duplex

Duplex strainer

Twin baskets with change-over so one can be cleaned while the other runs.

Pot

Pot type strainer

Vertical pot design for suction and transfer lines.

Custom

Custom strainers

Special screens, sizes and materials to your specification.

Cast steel Y type strainer with bolted cover — Y type strainer – cast steel body

Y type strainer manufacturer, supplier & exporter

Y type strainers are the most requested strainer in the range. They are compact, cost-effective and available with a wide range of flanged, welded and threaded connections, high-temperature options and easy mounting. Axegic manufactures Y type strainers in Ahmedabad, supplies them across India and exports them to overseas customers.

Basket type strainer supplier & exporter

Where flow rates are high or the media carries a lot of debris, a basket type strainer’s larger screen area means longer intervals between cleaning and lower pressure drop. Basket strainers are supplied to process, water and oil service in India and abroad.

Specification

Strainers
Size range	DN25 to DN600
Pressure class	ASME Class 150, 300 & 600
Types	Y type, basket type, pot type, T type, duplex
Design	Manufacturer’s standard
Face-to-face	ASME B16.10
End connections	Flanged to ASME B16.5 / BS / DIN, screwed, socket weld, butt weld
Testing	API 598
Body materials	Cast carbon steel – WCB, WCC Low-temperature carbon steel – LCB, LCC Alloy (martensitic) steel – WC1, WC6, WC9, C5, C12, CA15 Austenitic stainless steel – CF8, CF8M, CF3, CF3M, CN7M, CG3M Duplex stainless steel – CD4MCuN, CD3MN Monel 400 / Monel 500 (nickel-copper alloys) Grey cast iron, S.G. (ductile) iron Fabricated carbon steel

FAQ

Questions about industrial strainers

What is the difference between a Y strainer and a basket strainer?

A Y strainer is compact and economical for smaller dirt loads. A basket strainer holds far more debris with lower pressure drop and is preferred for larger flows.

What sizes are available?

Strainers are manufactured from DN25 to DN600 in Class 150, 300 and 600.

Do you export Y type and basket type strainers?

Yes. Strainers are supplied throughout India and exported from Ahmedabad.

Can I get a strainer with a custom mesh?

Yes. Custom-made strainer products are offered; specify mesh or perforation size and screen material in your enquiry.